Triumph Spitfire, Herald, GT6 , Vitesse & Dolomite Extended Wheel Stud (48mm) 21H5774XL

Stock Status for This Item

Out of Stock; See ETA Tab for arrival date

Red Watch

Extended wheel stud (48mm) Triumph Herald, Vitesse, GT6, Spitfire 21H5774XL

Wheel Stud - 3/8 UNF - 48mm Overall Length. The OD on the splines is 13mm

Do not take a chance when fitting Non Standard wheels to your Triumph

This can be a safety issue as well as a compliance issue

The Wheel nuts require enough bite on the stud to be safe and if you are moving away from the original steel wheels then you seriously need to consider extended wheel studs

These studs are 48mm long and 13mm OD on the splines

The original studs are easily pressed out and the new ones can be pressed in or pulled through using wheel nuts

A Shop Press is the preferred way of doing the job and will ensure no damage to the threads as you push the stud home.

Of course a car requires normally 16 studs but you can select the quantity that you require when you complete the purchase

Triumph Herald

Triumph Vitesse

Triumph GT6

Triumph Spitfire

Triumph Dolomite