S.U Carburetor HS2 HS4 & HS6 Needle & Seat Kit (Viton tip 0.070 Inch) VZX 1100

S.U Carburettor HS2, HS4 & HS6 Needle & Seat Kit.  

S.U part Number VZX 1100

Viton tip 0.070" spring loaded. The original brass tipped plastic body version is replaced by a more reliable Viton rubber tipped metal Body.

The Viton Tip will future proof your carburetor Needle and Seat against the ravages of Ethanol Fuel .

Needle & Seat Kit Viton Tip 0.070in Spring Loaded.

Now Superseded to VZX 1100.

S.U Carburetor Needle & Seat Kit  with Float Lid Seals - Morris Minor   CRB230  VZX 1100

Morris Minor SU Carb needle and seat kit with float lid seals.

Genuine SU Carburettor Parts

If you have flooding or fuel starvation issues, make sure you check out the operation of the needle and seat in the carburetor.

The system does wear out and it can cause a lot of problems for your Morris Minor.

This Needle Valve Controls the flow of Fuel into the Float Chamber and shuts off when the Float reaches the correct height.

Original versions were a Brass Body and used a Steel Needle.

These were replaced around 1960 by the Delrin type which had a nylon Spring loaded Body (anti vibration) with a Steel Needle tip.

This has now been replaced (2009) by a Spring loaded Valve but with a Viton tip.

Far superior to any other needle valve available.

Viton Tipped Float needle Valve and Seat Kit to suit all HS2, HS4 & HS6 SU CARBS 

EACH KIT IS FOR 1 CARBURETOR, PLEASE ORDER TWO KITS FOR TWIN CARBS.

As typically fitted to the following Classic vehicles:

Classic MINI

METRO

MORRIS MINOR 948cc & 1098cc

TRIUMPH HERALD

TRIUMPH SPITFIRE

TRIUMPH DOLOMITE SPRINT

TRIUMPH 2000

TRIUMPH 2.5

TRIUMPH TR7

TRIUMPH TR8

ROVER SD1 V8, 2300, 2600

MG MIDGET

MGB

MGB GT

AS WELL AS MANY OTHER APPLICATIONS.

 EACH KIT IS FOR 1 CARBURETTER, PLEASE BUY 2 FOR TWIN CARBS.

Alternate Part Numbers :

WZX 1100

WZX 1100A

VZX 1100

CRB230

VZX1100

VZX 1100