Rear Coil Spring - Standard - Triumph TR4a TR250 TR5 TR6  216275   GSV1001

Raise that sagging rear end of your car, or correct the Batchelors Lean by installing a set of new Coil Springs

One would normally replace these Rear Springs as a pair.

Note for TR4A, IRS Axle

The rear end of the IRS TR4A was notoriously weak. The standard rear spring (Part No 216275) is in fact the TR6 spring which is slightly uprated at 358lbs over the TR4A standard spring at 280lbs.

We recommend this as the minimum rate spring to use on TR4A models to avoid a sagging rear end.

It is recommended that all coil springs be fitted in pairs.

Nominal Sizes

295mm Free Length

95mm Outside Diameter
13.5mm Wire Diameter
360lbs Spring Rate

As found on the Following Triumph Sports cars

Triumph TR4a  (see notes above)

Triumph TR250

Triumph TR5

Triumph TR6

TR Register