Powerspark Electronic Ignition Kit (Positive Earth) for Delco Twin Point 6 Cylinder Distributor K29PP-Powerspark

Stock Status for This Item

Out of Stock; See ETA Tab for arrival date

Red Watch

Powerspark Electronic Ignition Kit (Positive Earth) for Delco Twin Point 6 Cylinder Distributor  K29PP

This Powerspark Electronic Ignition Kit is designed to replace the points and condenser inside the Delco Twin Point distributor for 6 Cylinder engines with a 3 lobe cam.

Please note this is a POSITIVE EARTH ignition kit for Positive Earth vehicles.

Use the pdf Download icon to see the Standard Installation Instructions for POSITIVE Earth Vehicle Installations 

Vehicles fitted with this distributor include:

Rolls Royce Silver Dawn 4.25, 4.5, 4.75 (1953-54)
Rolls Royce Silver Cloud MK1 4.25, 4.5, 4.75  (1954-62)
Rolls Royce Silver Wraith MK1 4.25, 4.5, 4.75 (1946-54)
Bentley R Type MK6 (1946-54)
Austin Vanden Plas Princess R 4.0 (1951-64)

This Powerspark Electronic Ignition Kit contains everything needed to convert your car from points & condenser to electronic ignition.

Fitting is easy and instructions are included with the packaging, as well as available online and in the video below.

Benefits:

- Easy to install
- Replaces troublesome points and condenser
- No visible difference in your engine bay
- Improved starting
- Improved performance
- Improved durability
- Maintenance free

Requirements:

- To be used with a coil resistance above 1.5 ohms only
-  MUST be used with silicone HT leads, NOT COPPER. Click here to browse our range of HT leads.

Powerspark Electronic Ignition explained in more detail:

The kit uses a simple magnetic trigger and optimises dwell to provide a reliable and consistent spark across the rev range. It is easy to install and maintenance free.

Each kit comprises a baseplate with electronic module, trigger ring and all wiring. The new electronic baseplate mounts exactly where the points and condenser baseplate sat. The kit connects directly to the coil using the wires provided, red to the positive side and black to the negative side. The ignition kit will automatically shut down if the ignition is left switched on without the engine running to prevent component damage.

Powerspark Electronic Ignition Kits are designed to work with a coil resistance above 1.5 ohms, typically 3.0 ohms. Some performance coils operate at a lower resistance and will need the High Energy electronic ignition kit.

Note the NEGATIVE EARTH Version of this item is listed as our item K29

Full fitting instructions are included with your kit, and plenty more instructions can be found on our blog.

Watch our 'how to fit a Powerspark Electronic Ignition Kit' video here: