Powerspark Electronic Ignition Kit (Positive Earth) for 6 Cylinder Lucas DX6A Non Vac Distributor K36PP-Powerspark

Stock Status for This Item

Out of Stock; See ETA Tab for arrival date

Red Watch

K36PP - Powerspark Electronic Ignition Kit (Positive Earth) for 6 Cylinder Lucas DX6A Non Vac Distributor

Use the pdf Download icon to see the Standard Installation Instructions for POSITIVE Earth Vehicle Installations 

This Powerspark Electronic Ignition Kit is designed to replace the points and condenser inside the 6 Cylinder Lucas DX6A none vacuum advance distributor.

The Lucas DX6A was fitted to British made cars of the late 1940s and early 1950s, with some early applications around 1939.

Please note this is a POSITIVE EARTH ignition kit for positive earth vehicles.

This Powerspark Electronic Ignition Kit is suitable for counter clockwise rotation applications only, so please check if you aren’t sure.

Full list of vehicles fitted with the Lucas DX6A distributor:

Austin Sheerline and Princess 1948
AC 16 1948-54
AFN Le Mans and Mille Miglia 1951-54
Alvis, 4.3 litre 1939
Armstrong Siddeley all models 1945-49
Austin 18 and 28 1939, LCC Ambulance 1939, 2 and 3 ton 1939-48, 2 and 5 ton Coach 1949-52, 30 cwt 1939-41, 14 1939-40, Skipper 100 1950-52
Bristol 401 1951-52, 401, 403 and 404 1953, 404 (special order) and X404 1954
Bristol all models 1951-52
Daimler 24 1939, 2.5 litre 1948-49, 27 1946-53
Daimler Ambulance 1949-54
Humber 16 and Snipe 1939
Invicta Black Prince (slave) 1948-49
Morris FVS 1954, Commercial NVS 1951-54, Commercial CVS 1939-40
Sunbeam 3 litre 1939
Wolseley 25 1939-48, Coach 1947-48, 16 1939

This Powerspark Electronic Ignition Kit contains everything needed to convert your car from points & condenser to electronic ignition.

Fitting is easy and instructions are included with the packaging, as well as available online and in the video below.

Benefits:

- Easy to install
- Replaces troublesome points and condenser
- No visible difference in your engine bay
- Improved starting
- Improved performance
- Improved durability
- Maintenance free

Requirements:

- To be used with a coil resistance above 1.5 ohms only
-  MUST be used with silicone HT leads, NOT COPPER. Click here to browse our range of HT leads.

Powerspark Electronic Ignition explained in more detail:

The kit uses a simple magnetic trigger and optimises dwell to provide a reliable and consistent spark across the rev range. It is easy to install and maintenance free.

Each kit comprises a baseplate with electronic module, trigger ring and all wiring. The new electronic baseplate mounts exactly where the points and condenser baseplate sat. The kit connects directly to the coil using the wires provided, red to the positive side and black to the negative side. The ignition kit will automatically shut down if the ignition is left switched on without the engine running to prevent component damage.

Powerspark Electronic Ignition Kits are designed to work with a coil resistance above 1.5 ohms, typically 3.0 ohms. Some performance coils operate at a lower resistance and will need the High Energy electronic ignition kit.

Full fitting instructions are included with your kit, and plenty more instructions can be found on our blog.

Watch our 'how to fit a Powerspark Electronic Ignition Kit' video here: