Powerspark Electronic Ignition for Delco D200 series 6 cylinder Distributors Negative Earth Only K26-Powerspark

Powerspark Electronic Ignition for Delco D200 series 6 cylinder Distributors  K26

Negative Earth Only

Use the pdf Download Icon to see the Standard Installation instructions including MSD 6AL Ignition Control

PRODUCT DESCRIPTION

K26 - Powerspark Electronic Ignition Kit (Negative Earth) for Delco 6 Cyl Distributor

This kit is designed to replace the points and condenser inside Delco 6 Cyl distributors. These distributors can be numbered Delco 204.

Note from the image where the Delco brand on your distributor may be found (the pictured distributor is a Four Cylinder)

Delco 6 Cyl distributors can be found in many vehicles classic Vauxhalls, as well as Triumphs and some Bedford commercial vehicles.

These include:

Vauxhall Cresta 2700cc 3300cc, Viscount 3300cc, Victor 3000cc, Ventora 3300cc

Triumph GT6,

Triumph Vitesse inc convertible 1600cc 2000cc,

Triumph 2500cc

Bedford CD

This Powerspark Electronic Ignition Kit contains everything needed to convert your car from points & condenser to electronic ignition.

Fitting is easy and instructions are included with the packaging, as well as available online and in the video below.

Benefits:

- Easy to install
- Replaces troublesome points and condenser
- No visible difference in your engine bay
- Improved starting
- Improved performance
- Improved durability
- Maintenance free

Requirements:

- To be used with a coil resistance above 1.5 ohms only
-  MUST be used with silicone HT leads, NOT COPPER. Click here to browse our range of HT leads.

Powerspark Electronic Ignition explained in more detail:

The kit uses a simple magnetic trigger and optimises dwell to provide a reliable and consistent spark across the rev range. It is easy to install and maintenance free.

Each kit comprises a baseplate with electronic module, trigger ring and all wiring. The new electronic baseplate mounts exactly where the points and condenser baseplate sat. The kit connects directly to the coil using the wires provided, red to the positive side and black to the negative side. The ignition kit will automatically shut down if the ignition is left switched on without the engine running to prevent component damage.

Powerspark Electronic Ignition Kits are designed to work with a coil resistance above 1.5 ohms, typically 3.0 ohms. Some performance coils operate at a lower resistance and will need the High Energy electronic ignition kit.

Full fitting instructions are included with your kit, and plenty more instructions can be found on our blog.

Watch our 'how to fit a Powerspark Electronic Ignition Kit' video here: