Lucas 12v Ignition Coil 3.0 Ohm Standard Wet Ignition (with push in HT lead) DLB101LUCAS
Lucas 12v Standard Wet Ignition Coil 12V (with push in HT lead)
DLB101LUCAS
SUITABLE FOR POINTS TYPE IGNITION SYSTEM OR DISTRIBUTOR AND PERFECT FOR
HALL EFFECT POINTS REPLACEMENT ELECTRONIC IGNITION KITS EITHER POSITIVE OR
NEGATIVE EARTH.
Standard 12V Lucas wet ignition coil
Has push in HT connection.
Standard type 12 volt Lucas coil with a push-in centre lead.
Supplied with the mounting bracket and ready to fit.
Wires attached via 5mm ring terminals, or adaptors (included) to take
Lucar terminals.
Overall height 150mm
Body height 105mm
Diameter 50mm
Resistance Rating:
Secondary Coil Min (kohms)
8.24
Secondary Coil Max (kohms) 10.08
Primary Resistance Min Ohms 2.72
Primary Resistance
Max 3.19
DLB101
Suitable connector :
Takes a push-fit coil lead, see our other listings if you require a
screwed connection.
Wiring connections can be Lucar connectors or eye terminal connectors.
Ballast resistors must be by-passed if replacing a Ballasted coil with
the standard coil.
Austin
Bristol
Commer
Daimler
Ford
Land Rover
Jaguar
Hillman
Humber
Reliant -
Morgan
Sunbeam
Singer
Riley
Morris
Morris Minor
Wolseley
Jowett
MG
Classic Mini
Standard
Triumph
Armstrong Siddeley
Vauxhall
Rover
Rolls Royce
AC
Alternate part Numbers
DLB101