Chrome T Handle Engine Oil Dipstick (A Plus Engines Only) MSA1134

Chrome T Handle Engine Oil Dipstick  A Plus Engines Only MSA1134

Chrome "T"- handle with "oil" embossed in the top.

High Quality T Handle displays OIL

Suits All Minis and Metros with the A+ engine.

Does not suit 850cc Engine & Automatic Transmission engines

(dipstick locates into metal tube).

This Dipstick will also suit many Classic Cars where the dipstick is missing or damaged etc.

Overall Length: 45mm

Shaft Diameter : 5.18mm

Upper Seal section OD   : 9.5mm ( there are two rubber O rings on this section )

T Handle : 12mm on Shaft  31.5mm Height and 40mm across the T Piece.

Oil level marks are set at 60mm from the base but you can obviously engrave your own levels if needs be.

Mini, Metro, Maestro

Fits the A+ Series engine only. 

(It's not always easy to tell the A Series engine from the A+ engine.

The simplest way to tell the difference is to look at the distributor clamp where it bolts to the block;

The A-series has a tapped hole each side of the distributor.

The A+ has one tapped hole and it is on the same bit of raised casting that the dipstick tube goes into.)

The A+ engine has been retro- fitted to many cars that were originally A Series cars such as

MG Midget

Morris Minor

Mini

Morris Marina etc.